RCA 32" Class FHD (1080P) LED TV (RLED3221)

I am VERY happy with this 32" TV/Monitor (RCA RLED3221-D), but I made a minor tweak that made me even happier with it. On the model RLED3221-D, there is a second set of what appear to be screw holes that align with the screw holes in the legs. But there is a bit of plastic in the way that keeps the bump on the legs from letting them screw in all the way. I left the legs intact, but used a pair of needle-nosed pliers to remove just enough of the plastic in the TV base to make clearance for the bumps. The two bits of plastic I removed with the pliers were barely more than 1/8" square, but removing them allowed the bump on the legs to settle in so the legs could both be screwed all the way on. The legs now only need a space 13½ inches wide on my 19"-wide raised place in my computer desk. The default leg positions would have been too far apart and straddled the raised place on my desk. This tiny alteration allowed me to use the legs set closer together and not have to mount the TV on the wall. RCA should consider making this slight modification to the monitor housing mold so that they could then boast two possible leg positions. The TV is quite stable with the legs using the altered mount points. See my photo with the 12" white ruler set between the legs.