13" Spiral Cutterhead Planer with 4-sided carbide Tips , Two-Speed

Check out our latest introduction to our product offerings…The 60200PC-WHD has 2 feed speeds, 26 fpm for regular every day production type planing, or 18 fpm, which will provide a finer finish on figured stock. As with our Wahuda spiral style cutterhead machines, our planer comes with 4-sided carbide inserts already installed. And we’ve have made it quick and easy to access the cutterhead, for insert rotation or replacement, by adding star knobs to the 4 inch dust port and dust chute screws that can be quickly removed by hand without a tool. Also included is a 4 inch to 2 ½ inch dust port adapter. We’ve also added pullout extensions on the heavy gauge infeed and outfeed tables to give you 45” of total table length if needed, for those longer pieces of stock. If even longer pieces of lumber need machining, you can always add additional supports…such as roller stands. And the tables and pullout extensions are easily adjusted to get them coplanar to the center wear plate.Weighing in at about 77 lbs, it can be moved around your shop for easy access. This planer has a turret style 8 position preset depth stop ranging from 1/8” to 1 ¾” which allows for consistent thickness when planing large quantities of stock. It has a standard stock capacity of 13” W X 6” H with a 1/8” maximum depth of cut. (1/32” max depth of cut at 10” wide and above). The powerful 120 V 15 amp motor, which equates to about 2.2 HP, will keep up with any stock you throw at it. CAUTION: The speed selector switch should only be changed while the machine is running and not under load. Otherwise, damage will occur to the speed selector mechanism.