D6 Pneumatic Tamping Machine Tamping Hammer Earth Sand Rammer Tamper Air Tool
Details
1) Front Sealing Ring: It can protect the piston from excessive dust and debris.
2) Hammer Head: The large hammer head (1.6inch) can achieve quick and even tamping.
Application
It is suitable for the tamping of concrete, brick, etc. and the molding of medium castings.
Specification
Model: D6
Material: Cast Iron
Assembly Required: Yes
Use Air Pressure: 0.63Mpa
Gas Consumption: 0.45L/s (0.11gal/s)
Impact Frequency: 700Hz/s
Piston Diameter: 25mm/0.9inch
Piston Stroke: 155mm/6inch
Hammer Head Diameter: 42mm/1.6inch
Trachea Inner Diameter: 13mm/0.5inch
Gross Weight: 6kg/13lbs
Package Size: 61*19*10cm/24*7*3inch
Product Total Length: 97.5cm/38.38inch
How to Replace the Sealing Ring
1. Insert a screwdriver inside the circlip and pry 1-2 times to remove it.
2. Install the sealing ring and apply a little lubricating oil.
Package Included
1 Set* D6 Pneumatic Tamping Machine
1* Chinese Manual
Notes
1. This product needs to be used with an air compressor (Not Included). Please prepare the air compressor in advance.
2. Please do not overtighten the sealing ring and keep it in proper tightness.
3. Please read the manual completely before installation and use.
