Global Industrial Unit Heater Horizontal or Vertical Downflow 7.5KW - 480V - 3 P

THIS HEATER CAN BE MOUNTED VERTICALLY OR HORIZONTALLY ON TO A CEILING USING THREADED MOUNTING RODS AND REQUIRES FOUR 5/16""-18 THREAD SIZE RODS (SOLD SEPARATELY) TO FIT IN TO THE THREADED HOLES ON THE HEATER WITH AT LEAST 7.5"" LENGTH AND SECURED IN PLACE USING LOCK NUTS. THIS 650 CFM FORCED AIR UNIT HEATER WITH ADVANCED PULL-THROUGH AIR FLOW DESIGN DRAWS AIR ACROSS HEATING ELEMENT TO QUICKLY CREATE HOT AIR THAT IS EVENLY DISTRIBUTED INTO A ROOM TO REACH DESIRED TEMPERATURE LEVELS. IN ADDITION LOUVERS ADJUST UP AND DOWN FOR EVEN GREATER CONTROL OF THROW DIRECTION. THE UNIT CAN PROVIDE UP TO 25600 BTU OR 7500 WATTS OF HEAT. EASY TO USE BUILT-IN TURN DIAL THERMOSTAT GOES FROM MIN POSITION ALL THE WAY UP TO MAX AND CAN BE SET AT DESIRED COMFORT LEVEL TO CYCLE ON AND OFF AUTOMATICALLY. IT IS CONSTRUCTED FROM COLD ROLLED STEEL FOR EXTRA TOUGHNESS AND DURABILITY. THE UNIT COMES EQUIPPED WITH THERMAL CUT-OFF PROTECTION A SAFETY FEATURE THAT WILL AUTOMATICALLY TURN THE HEATER OFF IF OVERHEATING OCCURS. THIS 480 VOLT HEATER IS A THREE-PHASE OPERATION. EASY TO INSTALL AND QUICK ACCESS TO CONTROL BOX AND WIRING MAKES IT EASY TO SERVICE. WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov -