Peel and Stick Wall Molding:Flexible Self-Adhesive Wall Trim,DIY Decorative Wall Panels,Wall Decorations for Tile,Mirror Frame Border,Ceiling (9.8ft×1.6in)

Product Description

How to use

1. Please wipe the wall with a rag or sandpaper, make sure the surface is clean and dry. Then measure and draw an area with the pencil.

2. Cut both ends of the molding trim into 45° according to the measured size.

3. Peel off the adhesive backing and stick it onto the smooth corner you need. Before sticking, use a hair dryer to preheat the tape to get better effect.

4. Please wait patiently for 24 hours to complete the final decoration work.

Tips:

-Please make a mark in advance to avoid repeated sticking, which will affect the stickiness;

-Please clean up the dust and water stains before installation. We don't recommend using it on the wall with dust;

-Before installation, you can use a hairdryer to heat the adhesive strips for better sticking effect;

-Please don't use your hands to test the adhesiveness of the adhesive strip, which will affect the stickiness;

-Don't touch it immediately after installation, it will reach the best viscosity after 24 hours;

-When not in use, you can use a hairdryer to heat the glued area and slowly peel it off. Generally, it will not damage the furniture and walls; if there is residue, wipe it off with a hot towel and detergent;

-Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures;