Portable 8-Ton Hydraulic Cutter Steel Cutter Hydraulic Bolt Cutter 4mm-16mm for construction, electricity

Description

This hydraulic rebar cutter is compact in structure and easy to operate. We also presented a portable toolbox, which can provide strong protection for products and make them easier to store and carry. This hydraulic rebar cutter has high strength and excellent durability, and it will be your powerful cutting tool.

Details

Non-slip Handle: The non-slip pattern on the handle can make you hold it more firmly, thus making your cutting work easier.

Twist Valve: The twist valve can easily control the hydraulic switch, and the clear logo on the valve can make you operate more accurately.

Hex Key: The hex key in the package can help you easily remove and replace the cutter head.

Application

The rebar cutter hydraulic-driven is ideal for making roll cages, frames, furniture, and other rebar works, widely used in construction, electricity, transportation, oil, fire protection, construction site, traffic etc. It can cut screw thread steel, round steel, low carbon steel and medium carbon steel.

Specification

Material: Metal

Blade Technology: 12 Chrome

Color: Yellow, Black

Model: SC-16

Item Package Quantity: 1

Cutting Force: 8Ton/17637lbs

Shear Area: 0.4-1.6cm/ 0.16-0.63in

Assembly Required: No

Gross Weight: 3.7kg/ 8.16 lbs

Net Weight: 3.3kg/ 7.28 lbs                        

Total Length: 42cm/16.54in

Cutter Head Size: 13*6.5cm/5.12*2.56in

Handle Length: 10.4cm/4.1in

Package Size:  45*19*8cm/ 17.72*7.48*3.15in

Package Included

1 * Hydraulic Rebar Cutter

1 * Portable Box

1 * Hex Key

1 * Chinese and English Instruction

Notes

1. It can't cut anchor chain, U-shaped lock, high hardness round steel, alloy with unknown composition, flat iron and stainless steel.

2. When using it, align the upper and lower cutter heads with the straight line of the blade, put the rebar in the middle of the knife, close the oil return switch in a clockwise direction, repeatedly pull the movable handle until the rebar is cut off, then release the oil return switch to reset the upper and lower cutter heads, and finally the operation is completed.

3. This product is strictly forbidden to be used under empty pressure and must be used in the presence of objects.

4. Please make sure that the cutting range of this product meets the material you want to cut before buying.

5. Please read the instructions in the package carefully before use, and pay special attention to the matters needing attention.

6. Tools should be maintained by personnel, and should not be disassembled arbitrarily, not knocking collision. When disassembling, attention should be paid to the cleanliness of the site. After using the product for a long time, the oil quantity will be reduced. You should spin off the fixed handle, pull out the oil plug at the end of the oil bag and loosen the oil return switch after the oil is filled. Toggle the active handle empty pressure repeatedly several times, so that all the air in the oil pipe out, and then the oil plug plug tight and screwed on the fixed handle.

7. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.