About this item

• Stereo Hi-Fi Audio Balun: 2-CH Stereo Hi-Fi Audio Long Distance Transmission, Up to 1000 foot-- 1600 foot via Cat5e/Cat6
• Easy Installation - Plug and play. No power required
• For analog stereo audio - Standard Red White connectors
• Audio Extender built in surge suppressor to protect audio equipment against damaging voltage spikes.
• Analog Audio Extender for DVD Players, Satellite Receivers, MPEG Players, Laptops, Hi-Fi Stereo Audio Amplifiers, Audio Switchers, AV Monitors, Powered Subwoofer other line level audio equipment

Product Description

Stereo RCA to Stereo RCA Audio Extender

The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required.

Set of 2 audio baluns - 1 receiver and 1 transmitter

Used in pairs, the Stereo Hi-Fi Audio Balun eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or moved within a structured cabling environment.

The Stereo Hi - Fi Audio Balun allows one Analog Stereo Hi-Fi Audio to be transmitted Via Cat5/5e/6 Cable, up to 1000 foot-- 1600 foot in a point - to - point connection.

It is built in surge suppressor to protect audio equipment against damaging voltage spikes.

Its integrated ground loop isolation prevents annoying "hum-bars" common noise with long distance installations.

Analog Audio Extender Applications

Boardroom Systems, Classroom training, Auditoriums, Custom home installations, Intercom systems ect

Sound Link Audio

Maximum Input: 2V RMS

Audio Source Impedance: 100 ohms maximum

Audio Receiver Impedance: 10 k ohms minimum

3dB Bandwidth 20 Hz to 20 KHz over the distance range

Insertion Loss per balun pair Less than 3 dB over the frequency range.

Common Mode Rejection Greater than 60 dB @ 1KHz Greater than

40 dB over the frequency and distance range

THDMaximum 0.007% @ 1 KHz over distance range

Plug and Play:

Left (White) and Right (Red) stereo audio RCA connectors

Transmission Balun into the HI-FI audio output of the source component

Receive Balun into your desired input component.

Insert the Cat5e/Cat6 cable into both ends of the Baluns.

NOTE:

Usually use the length of 1000 foot--1650 foot.

It can be up to 3280 foot, but there will be slight crosstalk.