It’s a common lamp code you’ll see on 8-foot fluorescent tubes. On this page, F96T12 typically refers to:

• F96: An 8-foot tube length commonly used in long ceiling fixtures.
• T12: A wider tube category used in many legacy shop and commercial lights.

You may also notice extra markings in product titles:

• HO (high output) for brighter applications.
• CW (cool white) indicating a cooler color tone.
• R17d for the 2-pin base used on many 8-foot HO fixtures.

If you’re shopping replacements (fluorescent or LED), match the length, tube category, and base type shown in your fixture and the product listing to help ensure compatibility.

There are LED options designed to fit 8-foot T12-style fixtures. Here’s a general approach:

1. Confirm the basics: Check length (8 ft), base type (often R17d on HO fixtures), and note the wiring style in the LED listing.
2. Choose the wiring type: Many 8-foot LEDs here are labeled ballast bypass and dual-end powered, meaning they’re wired to line voltage and don’t use the old ballast.
3. Plan installation: Power off at the breaker. Rewiring should follow the product’s diagram; hiring a qualified electrician is recommended.
4. Label the fixture: After a bypass, mark it as LED-only.
5. Handle old tubes properly: Follow local guidelines for fluorescent lamp disposal.

Always review the specific product instructions before starting.

You can browse available options on Walmart.com and filter to what you need:

• Search for terms like “F96T12” or “8 ft T12.”
• Use categories such as Light Bulbs, Commercial Lighting, or Garage Lights to narrow results.
• Compare specs: Look for length (8 ft), output (standard or HO), color (e.g., cool white), and base type (often R17d for HO).
• Check availability: Stock can vary by type and quantity.
• Consider alternatives: You’ll also see 8-foot LED replacements that note “F96T12 replacement,” which some customers choose for reduced maintenance needs.

Review product details and Q&A on each listing to confirm compatibility with your fixture.

You’ll notice more 8-foot LED replacements alongside fewer legacy T12 fluorescent options. This reflects a broader shift toward higher-efficiency lighting. On Walmart.com, availability for T12 tubes and compatible ballasts can vary, while LED alternatives are widely listed as “F96T12 replacements.”

• If staying fluorescent: Check listings for length, base (e.g., R17d), and ballast compatibility.
• If considering LED: Review wiring type (many are ballast-bypass, dual-end powered) and match the base to your fixture.
• Installation: For any rewiring, a qualified electrician can help ensure a safe, code-conscious setup.

The best path depends on your fixture, usage, and comfort with upgrades.

Most 8-foot LED tubes you’ll see here are labeled ballast bypass and dual-end powered. That means they’re designed to run on line voltage with the old fluorescent ballast removed or bypassed, following the product’s wiring diagram.

• Ballast-bypass LED: Requires bypassing or removing the fluorescent ballast; electrician installation is recommended.
• Fluorescent tubes: Use a compatible electronic ballast designed for F96T12 fixtures.
• Check the base: Many 8-foot HO setups use an R17d 2-pin base—match what your fixture uses.

Always verify the wiring type in the product description and follow all safety steps before starting work.