J-B Weld PlasticWeld Quick-Setting Epoxy Syringe - 25 ml, Yellow

I've used J-B Weld PlasticWeld to hold together plastic items that, for whatever reason, came apart, but, were worth repairing. In the photos is the plastic top of a plastic 30-gallon trash can, which I discovered had been broken by the trash collectors (they hired a new guy who is brutal, despite complaints to the town). I couldn't hold the piece together while "gluing" it, so, I used scrap metal and bolts to hold it, while applying the J-B product (I wore food-grade plastic gloves to protect my hands from the sticky stuff, which, I learned the hard way, is very difficult to remove without acetone or similar). I not only filled the gap, I made sure that it spread across the crack to give the epoxy a better grip, if you will (you can see the "glob" in the photo showing the bottom of the trash can top). Even though it is supposed to cure in 1 hour, I gave it two full days, and marvelled at the result (as I had with my previous use of the product). I decided to leave the brace on for additional security. So far, it has not allowed rain, snow, or even the violent trashman, to break through! The only negatives are the cost and it is difficult to get out of the two side-by-side tubes. Otherwise, I am very satisfied with the product.

I bought this to bond a tiny piece of hard plastic that came off a door from a mini fridge in my volvo truck. It worked well, let it cure 24 hours and it wasn't going anywhere. Until a few weeks later it gave out, but i had like 5 uses left. I also used this on a six inch tatue that broke off a small piece, about a dime in size. That one has lasted me several months to this day.. In conclusion, this is a good solution for bonding plastic and other material.