Automatic Soap Dispenser, Touchless Dish Soap Dispenser 17oz/500ml with Upgraded Infrared Sensor, 5 Adjustable Soap Dispensing Levels, Liquid Hand Soap Dispenser for Bathroom (Silver Set)

There are 5 different output levels on this hand soap dispenser, the default setting of soap volume output is level 3.

Note:

1. When you turn on the liquid soap dispenser or adjust the soap volume, the indicator light will be green.

2. When you turn off the dish soap dispenser, the indicator light will be red.

3. If the batteries are low, the red light will also light up and keep flashing.

Smart Infrared Sensor

Adopted with upgraded infrared sensor detection technology, this touchless soap dispenser can detect your hands or sponge quickly and dispense the soaps accurately.

No-touch is required and hands-free, reducing the possibility of cross-infection.

• Tips：lt is recommended to sense itdirectly under the motion sensor within 0-2.36 inch by your hand or light-colored objects.
  
  

Easy Refill & IPX4 Waterproof

A wide opening of the hand soap dispenser makes refill fast, easy, and spill-free, which will reduce soap outflow, and keep the dispenser and countertop clean.

No worry to place them on the countertop near water, the waterproof base and rubber seals can better avoid water splashing and ensure the safety of the battery.

• Tips： Do not overfill to prevent leakage
  
  

Anti-Leakage Design

With a unique design on the cap of our soap dispenser, it can be covered closely but also can open easily in need, which can prevent soap from leaking effectively if it falls over.

A leakproof & waterproof base and high sealing rubber ring help this soap dispenser to avoid the soap leaking from the bottom.

The non-slip feet are rubberized and don't leave marks on the countertop.

How to fill the tank with liquid soap?

1. Open the battery compartment.

2. Put the battery into the battery compartment, 4*AA Alkaline batteries (not included) are required, check "+" and "-" symbols of battery and soap dispenser to install correctly.

3. Open the liquid tank cover.

4. Pour the desired amount of liquid soap into the tank.

Note: Do not overfill the tank.

5. Turn on the soap dispenser by pressing the "+" button 2 seconds, green light on.

6. Place your hand under the sensor, the dispenser works.

• Note: Do not fill liquid soap before loading the battery.
  
  
• Note: Correctly insert 4 AA batteries, making sure to observe the polarities marked on the bottom of the soap dispenser.
  
  
• Package List: 2* Soap Dispenser, 1* User Manual
  
  

Warm Tips:

1. Please use liquid soaps with a low concentration of alcohol and non-foaming liquids, too thick soaps need to be diluted with an appropriate amount of water so that the unit can work normally.

2. Please sense the touchless soap dispenser 2-3 times to let it work when using it for the first time.

3. It's better to use your hands or light-colored sponges to activate the sensor of the automatic soap dispenser.

4. Before cleaning the tank, liquid outlet, or motion sensor, remember to turn off the soap dispenser first.

5. Please take out the battery if long time no use.

6. If it is not used for a long time, it is recommended to clean the container before use to prevent the outlet from being clogged.