Motor Cable Assembly

An "assembly" is set of manufactured parts or components that work together in unison as one mechanism or device. Cables of many forms are pervasive in foodservice equipment. A cable is a wire or grouping of wires usually insulated and held together within an overall sheath. The assembly is used for the transmission of electrical power or electrical signals to and from various components within a piece of equipment. Cables may be housed internally such as with ribbon cables, or may be external such as with power cords. An electrical cable is an assembly of one or more wires running side by side or bundled, which is used to carry electric current. A cable assembly is the composition of one or more electrical cables and their corresponding connectors. A cable assembly is not necessarily suitable for connecting two devices but can be a partial product (e.g. to be soldered onto a printed circuit board with a connector mounted to the housing).

Cable assemblies can also take the form of a cable tree or cable harness, used to connect many terminals together. Motors are used in all kinds of restaurant equipment to power beaters, blenders, slicers, basket lifts, filters, fans and much more. A motor converts one form of energy into mechanical energy. Electric motors convert electrical energy into mechanical motion, pneumatic motors use compressed air. A motor is a device driven by electricity, air, or hydraulic pressure, which does not change the chemical composition of its energy source. Electric motors may be classified by considerations such as power source type, internal construction, application and type of motion output. In addition to AC versus DC types, motors may be brushed or brushless, may be of various phase (see single-phase, two-phase, or three-phase), and may be either air-cooled or liquid-cooled.

• Motor Cable Assembly
• Made with high quality material

• Length: 9.75 in / 24.77 cm
• Width: 10.7 in / 27.18 cm
• Height: 1.25 in / 3.18 cm