IR Remote Sensor Wire
The IR sensor cable could be plugged into an IR repeater/extender or A/V extender and serves as the IR remote sensor for receiving the command signal emitted from an IR remote control.
The IR remote sensor wire is designed for receiving the control commands emitted from an IR remote. It could be plugged into a video source device that can support plug-in of external IR probe such as cable box, satellite receiver, home theater system or video/audio extender and serves as the IR sensor for receiving the input of IR remote control signal.
[Note]: Not all audio/video equipments or extender kits offer such IR plug-in. Please check your video equipment first before purchase.
Easy Wire Extension
This IR sensor wire uses the standard 3.5mm headphone plug. If you wish to extend this sensor wire for longer cable length in the setup, you can simply use a longer 3.5mm or 2.5mm audio extension cable to join with this sensor cable for cable extension if needed.
Product Features
- Both the IR blaster/emitter wires and the IR sensor wire all use the standard 3.5mm headphone plug. If you wish to extend these wires for longer cable length in the setup, you can simply use longer 3.5mm or 2.5mm audio extension cables to join with these IR input/output wires for cable extension if needed.
- The IR remote sensor wire is used for receiving the control commands emitted from IR remote controller. It could be plugged into a video source device that can support IR plug-in or video/audio extender and serves as the IR sensor probe for receiving the input of IR remote control signal.
- The IR blaster/emitter wire is used for blasting the IR remote control signal toward the A/V equipment to be controlled to perform the desired tasks.
- 6.5-feet long IR remote sensor wire x 1 6.5-feet long IR remote blaster/emitter wire x 1
