Electrical 4 Terminal Block Bus Strip

Connect all the wires in your panel or enclosure in one convenient place. Also known as barrier terminal strips, these blocks have screw terminals—just loosen a screw and wrap a stripped wire end around it (or use a spade terminal) and tighten the screw. All have four mounting holes. Color is black. UL recognized and CSA certified. Phenolic block. Tin-plated brass terminals. Ni-plated steel screws. Amps Per Circuit: 20A. For Wire Size, AWG: 22-12. Screw Terminal Size: #6-32. Center-to-Center:  0.38" Mount Hole Diameter:  0.17" Note: These are terminal strips and are NOT intended for use as ground strips. To be used as a ground strip, all terminals on one side would need to be pigtailed together. Item Details2.16" L x 0.87" W x .047" H