Bare solid soft drawn copper Conductor. Insulation: Thermoplastic high heat resistant nylon coated (THHN) / Thermoplastic high water resistant nylon coated (THWN). Bonding Conductor (Ground): 1 solid insulated copper conductor. Armor: Aluminum interlocked armor. Color Coding: Green (Ground), Black, White, Red. Binder Tape: Printed Polypropylene. UL listing: E189204. Applications: For concealed wiring in dry locations - For exposed wiring in dry location - For branch and feeder and service circuits in commercial, industrial, multi-residential buildings, and places of assembly - For power, lighting, control, and signal circuits - For use in cable trays in dry locations - For use in any raceway - For use as aerial cable on a messenger - When embedded in plaster finish on brick or other masonry, except in damp or wet locations - For use when run or fished in the air voids of masonry block or tile walls where such walls are not exposed or subject to excessive moisture or dampness. Class I Division 2, Class 2 Division 2 Hazardous Locations Rated at 90°C dry. Excellent crush resistance. Provides long service life. Cost effective alternative to installations in conduit. Industry compliances: UL 1569, 2556, 83, RoHS. Gasoline and oil resistance II. UL Through penetration fire stop systems: C-AJ-3147, C-AJ-3148, C-AJ-3149, FC-3041, FC-3042, WJ-3041, WL 3123, WL-3125, WL-3126, WL-3127, WL-3128. Made in Canada
WARNING: 