Heavy Duty 25 Amp Air Compressor Pressure Switch Control Valve 95-125PSI 4 Port

Features:
*25 Amp Heavy Duty Air Compressor Switch. If the switch you've been using has burned out and melted the contacts, this is a great heavy-duty replacement switch
*This switch is rated at 25 amps on 115V, 230V and 12V DC supplies. The switch is set to open at 95 PSI and off at 125 PSI. Pressure settings are adjustable from 30-40+- PSI.
*This switch is equipped with an on/off switch as well as an unloading valve, which can be used or not according to the requirements of the compressor.
*This switch has four 1/4" female NPT ports. these ports is always used as a tank pressure inlet and the other three can be used as pressure gauges, pressure relief valves, air outlets, or can be used when not needed its clogged.
*Single 1/4" compression inlet for unloader valve. (Comes with new compression nut and washer)
*Withstands 25A on 115V, 230V and DC supplies.

Specification:
*Part Name: Air compressor pressure switch control valve
*Material: hardware, engineering plastics
*Size:As shown in the figure
*Color:As shown in the picture
*Switch: Switch lever on the side.
*Cutoff pressure: 95 PSI,
*Cutoff pressure 125 PSI, also adjustable.
*Electrical life: 10,000 times
*Application scope: water and electricity
*Operating temperature: -10℃~60℃
*Shell material: hardware, engineering plastic
*Wiring method: 6.3mm terminal connection
*Mechanical life: 50000
*Contact material: silver-plated copper
*Model (pressure): 95-125 PSI, 5.5-8KG (optional)

Package Included:
1X air compressor pressure switch control valve


Notes:
1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2. Please allow a slight deviation between the data and the manual measurement.