Donemore 1Pcs Eco OBD2 Economy Fuel Saver, Chip Tuning Box Reader Diagnostic Scan Tool Scanner, Gasoline Car Saving Device Tool Save 15%, for Petrol Car Cost Saving

Donemore 1Pcs Eco OBD2 Economy Fuel Saver, Chip Tuning Box Reader Diagnostic Scan Tool Scanner, Gasoline Car Saving Device Tool Save 15%, for Petrol Car Cost Saving
Specification:
Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Saving.
It works based OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, EcoOBD2 adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to save lower and immission.
Certificates : CE / FCC / RoHS
2 Year Warranty
OBD2 necessarily for cars:
- Sold after January 1st, 1996 in the USA
- Sold after January 1st, 2001 in the European Union
- With Benzine engine sold after January 1st, 2003
What does NitroOBD2 make?
According to your driving habits, EcoOBD2 makes new map in the car's computer ECU for the vehicle's lower consumption. As you driving much more KM/Mile, EcoOBD2 renews the map and adjusts itself to match your car perfectly for more saving.
What is NitroOBD2 Chip Tuning Box?
EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the consumption of your car. When it plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU. With the received data from
ECU, EcoOBD2 adjusts the boost pressure, quantity of, injection timing and pressure to decrease the consumption of your car.
EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.
NitroOBD2 Chip Tuning Box is very easy to use, how?
Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. EcoOBD2 settings are optimal and the for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment.
EcoOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then EcoOBD2 adjusts itself to match your car perfectly. EcoOBD2 Chip Tuning Boxes are.
NitroOBD2 Chip Tuning Box Installation and Calibration steps:
1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec.
5 - Start up the engine.
6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more saving.
Does your car have OBD2 connector?
OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.
Where located OBD2 connector in your car?
1 Driver's side, underneath dashboard, in the area under the steering column,
2 Driver's side, underneath dashboard, between the driver-side door and steering column area
3 Driver's side, underneath dashboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical left of vehicle centerline
7 Center console, vertical right of vehicle centerline or on passenger side of center console
8 Center console, horizontal in front passenger area.
Package Included:
1 x EcoOBD2 Chip Tuning Box Interface
1 x User Manuel English