Pneumatic Punch Press Machine Sheet Metal Hole Punches Milling Machine 3306LB/1500KG

Introduction:
The pneumatic press is the high-pressure gas produced by the compressor, which is transported to the solenoid valve through the gas pipe. The working state of the cylinder is controlled by the movement of the solenoid valve through the switch, and the punching is completed.

Parameter:
1. Voltage: 110V
2. Pressure: 3306lb/1500kg
3. The Die Hole Diameter: 0.98inch/2.5cm
Working Countertops Size: 8.7*11inch/22*28cm
Outer Diameter of Trachea: 0.47inch/1.2cm
Booster Cylinder Specification: 1.97inch/50mm（Adjustable 1.97inch/50mm）
Working Air Pressure: 0.5-0.8MPa

Note:
1. Check whether the air pipe is properly connected to prevent air leakage and make the machine unable to work normally.
2. Avoid placing your hand under the punching shaft during work to avoid accidents.
3. Do not wipe the machine with a damp cloth to avoid rusting the machine.
4. Strictly prohibited to avoid personal injury.
5. The rated pressure of the air compressor is 0.8mpa. The capacity of the air compressor storage tank is about 60L,the larger the capacity, the longer the service time and the more stable it is. The displacement is optional 200L/min, the larger the displacement, the larger the applicable machine model.
6. The actual output pressure is about 80% of the theoretical pressure.

Items Included: 230325-SunY
3306lb/1500kg Pneumatic Punch Press Machine