【 Specification 】
This printed water bottle featuring a handle is offered in two sizes:
Capacity 40oz: 10.8 (Height) x 3.85 (Diameter) inches / 27.5 (Height) x 9.8 (Diameter) cm (excluding handles);
Capacity 30oz: 9.9 (Height) x 3.5 (Diameter) inches / 25.2 (Height) x 9 (Diameter) cm (excluding handles).
【Material Description】 Food-grade 304 stainless steel + food-grade PP + food-grade silicone
【Product Reminder】 For convenient transportation, the handle is not attached upon receiving the goods. Screwdrivers and accessories are provided with the equipment. Install them by yourself. It is effortless to install.
【 Warm Tips 】
Drink water with a straw, and the water temperature should be below 60℃. Do not direct the nozzle towards the human body to avoid burns.
1. Minors should use it after adult guidance or instruction.
2. Before usage, clean the interior and exterior of the cup with neutral detergent in warm water.
3. To achieve the optimal effect of heat and cold preservation in the cup, it is recommended to add hot water or ice water for preheating or pre-cooling. Ice is preferable when refrigerating.
4. When the cup body is tilted, please tighten the lid clockwise to prevent leakage.
5. Left-handed users can position the handle on the left hand side. After screwing on the lid, you can turn the drinking port clockwise. The opposite holds true for right-handed users. Place the handle on the right side, and when screwing in the lid, screw the mouth towards yourself, clockwise.
6. When cleaning, please employ neutral detergent and warm water. Do not utilize cleaning agents such as alkaline bleach and chemical rags.
【 Holding Time 】 Holding: 8 hours (return to normal temperature); Refrigerate: 10 hours (return to normal temperature).
