Mustang II IFS Hub-to-Hub Independent Front End Suspension Kit, Tubular Control Arms, 500 Rated Coilovers, Manual Rack, 5 x 4-3/4" Bolt Pattern

Kit Includes: (2) Speedway Mustang II Steel Spindles. (2) QA1 ME303 Coil-Over Shocks for Mustang II. (2) Replacement Springs for Mustang II Coilovers. (2) QA1 Pin Cross 0.750" O.D. (1) Mustang II Manual Rack & Pinion. (2) Speedway Mustang II Steering Rack & Pinion Mounting Bushing. (2) Mustang II Outer Tie Rod End, Manual Version. (1) Pinto-Mustang II Spindle Nut & Washer Kit. (1) GM Metric Caliper Bracket Set for Mustang II Spindle. (2) 1978-Up GM Metric Brake Calipers, IMCA Approved. (1) Speedway Soft Street Brake Pads, GM Metric 1978-Up D154. (2) Speedway 1974-80 Ford 11 Inch Front Disc Brake Rotors. (1) Bearing-Seal Kit for Two Mustang II Brake Rotors. (2) Speedway Mustang II Tubular Lower A-Arms for Coilovers, No Strut Rod. (4) Speedway Mustang II Upper Control Arm T-Bolts. (1) Mustang II Manual Rack Bolt Kit. (1) 9/16 Inch Fine Thread Tie Rod Nuts. (1) Speedway Mustang II Coil Spring Rubber Isolator Cushion. (1) Mustang II Power Rack Bolt Kit. (2) Mustang II Rack Spacer, 3/4 Inch. (2) Speedway Mustang II Tubular Upper Control Arms, Stock Width. (1) Front Disc Brake Hardware Kit. With our Mustang II Independent Front Suspension kit you get brand new tubular steel upper and lower control arms with polyurethane bushings, steel spindles, Rubber Brake Lines, new coilovers, new manual rack & pinion with bushings or remanufactured manual rack & pinion with bushings and an 11" brake kit featuring GM Metric-style calipers. Ready to install with your Speedway or Heidts Mustang II crossmember.  Must include Mustang II crossmember for complete installation (sold separately)