PSR1006 6ft Long 30W 120V Heat Trace

EASYHEAT PSR Pre-Terminated Self-Regulating Freeze Protection Cable for Water Pipes and Roofs - 6 Foot Long - 30 Watts - 120 Volt - 5 Watts per Foot at 50 Deg. F. - 30 Inch Cold Lead (Plug Included) Easy Heats PSR cable is a Self-Regulating commercial grade heat trace. Due to the self-regulating nature of the cable, the cable can cross over itself without causing a premature failure. This is a convenient feature when wrapping the cable around a large valve for freeze protection or when running the cable in a down spout in a roof and gutter deicing application. When using the PSR heat trace on plastic pipes, it is recommended to use aluminum tape on the plastic pipe before installing the PSR heat trace. The aluminum tape will conduct the heat away from the cable and spread the heat out over a larger surface area on the plastic pipe providing superior freeze protection. Securing the PSR heat trace to a pipe is made easy with Fiberglass tape. The tape should be used as necessary to hold the PSR heat trace in place allowing the installation of fiberglass insulation around the pipe to complete the job.