ALG 7052 Textured Marine Upholstery Vinyl Fabric, Weathered Grey

Backing is a Hi-Loft 100% Polyester. Mildew Ventron B-20 ASTM G-21: Pass Adhesion-ASTM D-751-89P Pounds/Inches(Min):Warp-10.00 Fill-10.00 Ultraviolet AATCC 16 Zeno Test 150: Pass Stitching Strength Din 54301 Pounds(Min): Warp-19.70 Fill-13.50 Abrasion ASTM D3889-87 Taber CS-17 500g: no change at 200 cycles Tear Strength-Fed Stnd 191 M5134 Pounds: Warp-37.00 Fill-41.00.

• Textured Marine Upholstery Vinyl

• White Vinyl: Dye transfer from clothingespecially blue jeans onto white vinyl
• This transfer is due to the wide range of dyes now being used in clothing coming from different countries
• This is not a defect to the vinyl
• J. Ennis will not be honoring claims on white vinyl due to dye transfer issues from clothing
• Crypton Leather & Vinyl Cleaner & Restorer can be used to remove the dye
• Remove most stains with a soft cloth or sponge, mild soap & water
• If stubborn stains remain, use a soft brush
• Rinse thoroughly with clean water & wipe dry
• Do Not Use Powered Abrasives or Steel Wool
• Products of this nature will always result in additional damage

• Mild Soap & Water

• Upholstery Outdoor Recommended for Boat Interiors

• Color: Weathered Grey
• Abrasion: Exceeds 50,000 Double Rubs
• Backing Content: 100% Polyester
• Backing Weight: 5.50 oz Per Lineal Yard
• Cold Crack: Cold Crack is equal to or greater than -23 degrees Celsius & -10 Fahrenheit
• Construction: Vinyl
• Content: 100% Polyvinyl Chloride
• Fire Retardancy: UFAC Class 1 Motor Vehicle Safety Standard 302. California Bulletin 117-Section E
• Ultraviolet: Product is Rated Ultraviolet Resistant equal to or greater than 1000 hours
• Mildew: Mildew Resistant
• Tearstrength: Passes Federal Test Method Standard 191 Textile Test Methods 191A-5134 - Warp = 37 lbs & Fill = 41 lbs
• Tensilestrength: Passes ASTM D751 - Warp = 90 lbs & Fill = 68 lbs
• Style: Solids & Plain
• Width: 54"
• Weight: 19.33 oz Per Square Yard,, 29.00 oz per Linear Yard