munirater 4 x 4-1/8 Precision Mill Vise Anti-Jaw Lifting W/Swivel Base, Lockdown CNC Milling Machine Vise With Base Clamp Vise for Milling Shaping and Drilling Machines

4 x 4-1/8" Precision Mill Vise

Specification:

Dimensions Jaw Width: 4"

Jaw Opening: 3.93"

Jaw Height: 1-1/4"

Accurate to 0.002" per 4" on squareness and 0.006" per 4" on parallelism without base and 0.008" per 4" on parallelism with base

Vise Key: 11.11mm table slot width, 14.00mm base width

Base Swivel: 360-degree

Features:  

-Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates.

-The precise 360-degree scale help to adjust any position as you need. Greatly increased flexibility of use.

-Highest clamping power. It's very accurate and durable.

-Sliding surface of the vise bed is flame hardened and ground.

-Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI

With anti-jaw lifting mechanism. K type angle lock nut is made from the highest quality ductile Iron, firm and durable.

- The adjustable handle with a comfortable grip makes it easy to operate and improves efficiency.

-Acme screws and easy to read 0-360 deg scales.

-4 screws from the top through the jaw reduce key's side force and make the vise body not easy to broke, extend vise life.

Package Included:

1 x 4 Inch Precision Mill Vise

1 x Accessory Set