3000 watt PowerVerter Plus Heavy-Duty Inverter with 4 GFCI Outlets
Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site with Tripp Lite's PV3000GFCI. Continuously supplies up to 3000 watts of 120V AC power to 4 AC GFCI protected outlets from any 12V battery or automotive DC source. Includes a PV remote and 25 feet of cable. Heavy-duty, compact metal case design is among the smallest, most rugged inverters available at this power level. Conforms to OSHA 1926.404 (b) (1) (ii)
Features:
- Converts DC power into 3000 watts of continuous 120V AC power
- 15- and 20-amp outlets provide 120V AC power
- Includes "Battery Saver" low voltage alarm/shutdown
- Heavy-duty DC input terminals assure solid connection to battery. Dual connections provide high wattage to support heavy equipment loads.
- Operating mode switch controls inverter operation.
- Remote control jack provides optional remote monitoring and control (when used with FREE, included LED/switch module)
- Remote Control LED/Switch Module controls and monitors your inverter from virtually anywhere within your vehicle with use of included extra-long cable. Allows multiple mounting options, including behind or below a dashboard or compartment. Features daisy-chain capability
- Battery charge level LEDs indicate the approximate charge level (high/medium/low) of connected batteries
- Connected load level LEDs indicate the approximate wattage load level (high/medium/low) of connected equipment
- Sturdy extruded aluminum case stands up to the toughest work environments
- Battery conservation charge dial conserves battery power by setting the low-load level at which the inverter automatically shuts off
- 1-year limited
Specifications:
- Output
- Nominal Output Voltage(s) Supported: 120V
- Frequency Compatibility: 60 Hz
- Output Receptacles: (4) 5-15R
- Pure Sine Wave Output: No
- Output (Watts): 3000
- Continuous Output Capacity (Watts): 3000
- Peak Output Capacity (Watts): 6000
- Output Voltage Regulation: Maintains PWM sine wave output voltage of 115 VAC (+/- 8 VAC)
- Output Frequency Regulation: 60 Hz (+/- 3 Hz)
- Overload Protection: Automatic overload protection shuts down inverter system in the event of overloads. Output is protected by 2 built-in 20A circuit breakers (each controlling power to 2 outlets). Inverter and electrical system are further protected via set of 6 40A automotive input fuses.
Input - Recommended Electrical Service: Requires 12VDC input source capable of delivering 286A for the required duration (when used at full capacity). For automotive applications, professional hardwire installation with 500A battery system fusing is recommended.
- Maximum Input Amps: 286
- Maximum Input Amps Details: Full continuous load - 286A at 12VDC, No load - 2.6A at 12VDC, Shutdown / load sense mode - less than 500 milliamps
- Input Cord Length Details: User supplies cabling. Minimum gauges for full load operation: 0 (10 ft max), 00 or 2/0 (13 ft max), Twin 00 using 4 conductors (26 ft)
- Voltage Compatibility (VDC): 12
Battery - DC System Voltage (VDC): 12
WARNING: 
