Hero image 0 of Crown CDi DriveCore 4|300 Amplifier - 1200 W RMS - 4 Channel (cdi4x300), 0 of 8

Crown CDi DriveCore 4|300 Amplifier - 1200 W RMS - 4 Channel (cdi4x300)

(No ratings yet)

Key item features

DriveCore Technology: Crowns proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
Network Control and Monitoring: Through Harmans HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.. DSP: On-board Digital Signal Processor in each amplifier allows for custom configuration. LevelMAX Limiter
Direct Drive 70/100Vrms Output: Each output channel is capable of provide either 70V or 100V for high impedance applications.. Front-Panel Interface: Completely configure the amplifier using an intuitive front-panel interface.. GPIO/AUX Port: Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.. Specifications: Channels: 4
Sensitivity (for full rated power at 8 ohms): 0.7V RMS. Rated Power Output (per channel @ 4 ohms): 300W. Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms): > 104dB. THD (full rated power, 20 Hz - 20 kHz): 0.0035. Damping Factor (20 Hz to 100 Hz): > 1000. Frequency Response (8?, 20 Hz - 20 kHz): +/-0.5dB. Crosstalk (below rated power) 20 Hz to 1 kHz: > 80dB
Input Impedance (nominally balanced, nominally unbalanced): 20 k? balanced, 10 k? unblanced. Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 12.25. Weight: 16.13 lbs (7.31 kg). Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 240V~

Specs

Rms power rating
1200 W
Speaker config.
4.0
Brand
Crown
Rec. use
Commercial
Impedance
8 ohm
Model
CDI4300

Current price is $3,070.00

Price when purchased online

Free shipping
Free 30-day returns

Walmart Protection Plan by Allstate

(Only one option can be selected at a time)

3-Year Plan - $59.00

4-Year Plan - $77.00

How do you want your item?

Ships to

Arrives by Thu, May 21

Sold and shipped by Audiosavings

4.29091960670908 stars out of 5, based on 1729 seller reviews(4.3)

Report an issue with this seller

Free 30-day returns

About this item

Product details

Technical Information

Minimum Frequency Response: 20 Hz
Maximum Frequency Response: 20 kHz
Total Harmonic Distortion (THD): 0.4%
Impedance: 8 Ohm

Audio

Audio Channels: 4
RMS Output Power: 1200 W

Network & Communication

Ethernet: Yes

Power Description

Operating Power Consumption: 350 W

Physical Characteristics

Height: 3.5"
Width: 19"
Depth: 12.3"
Weight (Approximate): 16.13 lb

Miscellaneous

Country of Origin: China
Environmentally Friendly: Yes
Environmental Compliance: Waste Electrical and Electronic Equipment Directive (WEEE)

Warranty

Limited Warranty: 3 Year

DriveCore Technology: Crowns proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
Network Control and Monitoring: Through Harmans HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.. DSP: On-board Digital Signal Processor in each amplifier allows for custom configuration. LevelMAX Limiter
Direct Drive 70/100Vrms Output: Each output channel is capable of provide either 70V or 100V for high impedance applications.. Front-Panel Interface: Completely configure the amplifier using an intuitive front-panel interface.. GPIO/AUX Port: Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.. Specifications: Channels: 4
Sensitivity (for full rated power at 8 ohms): 0.7V RMS. Rated Power Output (per channel @ 4 ohms): 300W. Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms): > 104dB. THD (full rated power, 20 Hz - 20 kHz): 0.0035. Damping Factor (20 Hz to 100 Hz): > 1000. Frequency Response (8?, 20 Hz - 20 kHz): +/-0.5dB. Crosstalk (below rated power) 20 Hz to 1 kHz: > 80dB
Input Impedance (nominally balanced, nominally unbalanced): 20 k? balanced, 10 k? unblanced. Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 12.25. Weight: 16.13 lbs (7.31 kg). Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 240V~

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Rms power rating

1200 W

Speaker config.

4.0

Brand

Crown

Rec. use

Commercial

Warranty

Warranty information

3 Year

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.