Note:
1. Please note that some vehicles may require install decoder or load resistor to avoid error message, turn signal hyper flash or fast blinking.To confirm if need a DECODER or not, just remove the original headlight bulb and check if the dashboard show BULB ERROR or not.This listing do not included bulb adapter, some of the car need add bulb adapter to get the LED bulbs replace the halogen bulbs(Normally H7 and H1 need special adapter).
2. Our LED bulbs only replace halogen or led headlamps.Can not replace the HID headlamps. Please double check before order. If you are unsure the item fit or not, please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not, thank you.
3. Compatibility:
2015 Kia Sorento EX / SX / LX
2016-2017 Kia Sorento EX / SX
2018 Kia Sorento
Technical Specification:
Light source: 3570 N
umber of lights: 2 SMD
Power: 40W/Bulb
Lumens: 4000LM
Size: 73MM*12MM
Color temperature: 6000K
Working voltage: 12V-24V DC
Beam angle: 360 degrees
Application: Headlight/Fog Light
Advantage:
*Latest COB chip(USA) light source, 3 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*Xenon white light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
*Built-in constant current CPU, instant full brightness without start-up relay
Package Included:
2pc LED headlight high beam
2pc LED headlight low beam
2pc LED Foglight
Install Caution：
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
