The ASCO 8030G013 is a pilot-operated, 2-way/2-position solenoid valve designed for controlling the flow of air, inert gases, and water. It features a normally closed valve starting configuration and incorporates both diaphragm and piston valve types. Constructed with a brass body and NBR seal material, this valve's typical applications include dispensing, gas shutoff, tank draining, and vacuum holding. Mounting orientation: Horizontal or Vertical; IP66 rating; NEMA enclosure ratings: 1, 2, 3, 3S, 4, 4X; rated for washdown environments. Key Features: - Valve Design: 2-Way/2-Position, pilot operated - Valve Starting Configuration: Normally Closed - Valve Type: Diaphragm, Piston - Body Material: Brass - Seal Material: NBR - Nominal Pipe Size: 3/8 in - Orifice Diameter: 3/8 in - Center Line Pipe Center Size: 3-9/16 in - Operating Pressure Differential: Minimum 15 psi, Maximum 15 psi for air/inert gas and water; Minimum 0 psi for light oil - Coefficient of Volume (Cv): 1.8 - Coil Included: Yes; Coil Insulation Class: F; Wattage: 10.1 W; Voltage: 120V AC; Frequency: 50 Hz, 60 Hz - Coil Enclosure: Without Junction Box, Watertight - Electrical Connections: DIN with 1/2 in Conduit Hub - Inlet/Outlet Connection Type: NPTF with NPT thread type - Mounting Orientation: Horizontal or Vertical - Environmental Rating: Hazardous, Indoor, Outdoor, Washdown; IP Rating: 66; NEMA Enclosure Rating: 1, 2, 3, 3S, 4, 4X - Dimensions: Overall Height 4 in; Overall Length 2 in; Overall Width 2 in - Includes Seal: Yes - Standards: CSA, UL Listed
