Feature:
*Works on wood and machine screws as well as cross screw, flat, hex, or painted over screws.
*The 5 piece screw extractor set works with any drill and any screw size or bolt.
*Guaranteed easy removal of rusted, free-spinning screws, and deck screws. Made of hardened steel.
*It can removeany stripped screw in 10 seconds or less.
*Easy to use, just two easy steps.
*An essential part of every tool kit box.
Instructions for use:
1. The #0 drill bit can take 4-6mm screws, the #1 bit can take 5-7mm screws, the #2 bit can take 8-10mm screws, the #3 bit can take 10-12mm screws, and the #4 bit can take 12-14mm screws.
2. The product is suitable for hand drill and lithium drill.
3. The steering is a reverse operation. With the electric drill/hand electric drill, the speed must be slow, not too high or suddenly accelerated.
4. If the broken head screw is smooth, you need to use a drill to drill the hole, otherwise it will slip and the product cannot be used directly.
5. It is suitable for iron or steel screws, but not for very rusted screws or stainless steel screws.
6. The speed of the drill bit should not be too fast, and it should be run at a low speed!
Specifications:
Product name: Broken wire extractor
Material: Alloy steel
Color: Silver
Size:
0#: Remove Dia:3-5mm
1#: Remove Dia:3-5mm
2#: Remove Dia:4-8mm
3#: Remove Dia:5-10mm
4#: Remove Dia:6-12mm
Suitable for: Remove rusted screws
Quantity: 1PC
Package Contents:
1PC× Broken wire extractor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
