Uxcell FC/APC Fiber Optic Quick Connector, Single Mode Fiber Cable Quick Connector FC Fast Connectors Adapter, Pack of 2

What is this?
Fiber optic quick connectors are used to connect optical fibers to optical fibers or optical fiber pigtails, which are equivalent to making joints widely used in optical fiber transmission systems, CATV networks, telecommunications networks, LAN, etc.

Are there any advantages of the product?
This fiber fast connector adapter is easy to install and use and has the characteristics of high reusability, good inter-pluggability, low insertion loss, large return loss, high-temperature resistance, tensile strength, and stable and reliable transmission.

How to use it?
Usage steps: Usage steps: 1. Thread in the optical cable and open the outer sheath of the optical cable; 2. Use a stripper to peel off the PVC layer and cut off the reinforcing ribs simultaneously; 3. Use alcohol cotton to remove fiber coating; 4. Put in the guide rail line and cut 9 to reserve 10 mm; 5. Pass the optical fiber from the end of the connector until the optical fiber is docked; 6. Move the top of the switch casing upward and lock it to tighten the bare fiber

What should I notice?
When using an embedded fiber quick cable connector, you need to pay attention to the following points: 1. During the entire installation process of the connector, all links must be kept clean; 2. Ensure the quality of the fiber-cutting end face; 3. Insert the fiber slowly to prevent the optical fiber is damaged, do not remove the dust cover after installation; 4. Ensure that the optical fiber end face and the embedded optical fiber are closely matched.