H1 H11 LED Headlight Bulb Conversion Kit High Low Beam Lamp 6000K Super White
Why Choose Use H1+H11 LED Bulbs?
1. Once you have the idea to upgrade the bulb, then you will act! But in the face of a dazzling array of products on the market, do you know how to choose the right led bulb for your car?
2. There are 2 types of H1+H11 led bulbs on the market. One has good heat dissipation performance and built-in fan that can achieve ultra-high brightness, such a design will result in a bulky product that requires replacement of the specific adapter to install it. The other is 1:1 design with halogen, fanless, the brightness will be a little brighter than the halogen, no need to replace the adapter, but due to the polarity design, so there will still be many installation problems.
3. H1+H11 led bulbs have been greatly improved. 1:1 design with halogen, no fan, use aluminum edging to provide better heat dissipation capacity, non-polarity, no need for changing adapters and built-in upgraded intelligent IC driver make most of vehicles without error warnings or radio interference, but some sensitive models may require a canbus decoder, keep you away from many kinds of installation problems!
Parameter:
Compatible With：H1+H11
Power：50W/per bulb
Lumens：10000lm/per bulb
Color Temperature：6000K White
LED Chips: CSP
Waterproof Level：Dustproof & Waterproof IP67
Operating Temperature: -40 - +80°C
Work Voltage(V)：DC 9V-18V
Placement on Vehicle：Front,Left, Right
Applicable Used as a：Headlight or Fog Lights, DRL Lights
Suitable For Pickup, Wagon, UTB, Cab, ATV, SUV, Jeep, Truck, Bus .etc
Package include：
4x H1+H11 LED Bulbs
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
