AIRCAT Pneumatic Tools 1880-P-A: 1-Inch Pistol Grip Impact Wrench with Pinless Hammer Mechanism 1,900 ft-lbs

It's time to modernize your toolkit. Maintaining buses, trucks, and farm equipment—as well as large tire work, major engine teardowns, and spring bolt removal—requires a powerful tool. The AIRCAT 1880-P-A 1-inch Pistol Grip Impact Wrench packs 200 to 1,900 ft.-lbs of loosening torque into a hand-held air tool. This wrench is built with a durable twin-hammer mechanism, and the D handle design includes an exhaust directed away from both the workplace and operator. This power tool delivers 1,700 ft-lb maximum torque and 1,900 ft-lb of loosening torque. It boasts a hard-hitting pinless hammer mechanism (low wear), a molded hammer case protective cover, a unique combined rear protective gasket/band prevents band from moving out of position, a rugged bolt-on side assist handle, a combined forward/reverse power management switch for better control, and a combined through hole and friction ring socket retainer. The noise level is only 88 dBA. Specifications: Square Drive (in.): 1 Air Cons. (CFM): 16 Bolt Capacity (in.): 1-1/4 Air Inlet (in.) NPT/BSP: 1/2 Rec. Hose Size (in.): 1/2 Weight (lbs.): 23.5 Length (in.): 11.75 Free Speed (RPM): 4,800 Impacts Per Minute (IPM): 900 Max. Torque (ft-lb): 1,700 The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our air tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates a patented, ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT includes the patented tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise.