ANENG Multimeters,Meter Handheld Tester SZ02 Smart Current NCV Universal Meter 9999 NCV Universal Tester Voltmeter Ammeter Smart Auto 9999 Universal Meter Handheld SIUKE Smart Scope 9999 Resistance

ANENG SZ02 Smart Digital Multimeter Auto Range 9999 Counts NCV Universal Meter Handheld Multifunctional Tester Voltmeter Ammeter with Backlight Flashlight AC/DC Voltage & Current Resistance Capacitance Frequency Temperature Measurement


Item Size: 127 * 67 * 29.2mm / 5.00 * 2.64 * 1.15in

Power Supply: 2 * 1.5V AAA battery (NOT included)
NCV Induction: Yes
Item Weight: 131g / 4.62oz
Dual Flashlights Design: two torch at the top for auxiliary the working area in the low lit or dark environment, not afraid of dark when working, and it will automatically turned off after about 5 minutes.
Package List:
Data Hold: Yes
1 * Pair of Test Lead

1 * Thermocouple
Range: Auto range
Diode: Yes
Hz: 0~1000Hz
Temperature: -40~1000 (-40~1832℉)


Specifications:
Capacitance: 0nF~99.99mF
Sampling Time: About 3 times/second


Auto-off: 15 minutes

AC Current: 20mA~10A
Features:
Material: ABS
Working Altitude: Max. 2000m
Safety Operation: built-in overload conservation fuse, smart anti-burn. Meet the DC/AC 600V CAT III overvoltage standard, and double insulation conservation(class II).
Compact & Accurate: as small as a mobile phone, convenient to use and carry around. Built-in with high performance chip to ensure its accuracy.
Buzzer: Yes
Storage Temperature: -10~50℃
Intelligent Multimeter with Multiple Functions: it can measure AC/DC current, AC/DC voltage, resistance, capacitance, temperature, frequency, continuity and diode test, fire wire detection, etc.
Package Size: 13.5 * 7.5 * 6.6cm / 5.31 * 2.95 * 2.60in
1 * Manual (English)
Color: Orange / Red (Optional)
Large LCD Screen & Easy to Control: soft push buttons is easy to operate, the large LCD display screen with bright backlight, convenient to check the measured data at a glance even in the dark environment.
Resistance: 0Ω~99.99MΩ
1 * Multimeter
DC Current: 20mA~10A
Max. Display: 9999 digits
Zero/Fire Wire: Yes
NCV Non-contact Voltage Detection: place the NCV sensor closer to the measured cable, and the multimeter can detect whether the voltage is greater than 90V AC voltage. When the AC voltage being detected, the meter buzzer alarms and the LCD analog bar displays the induction intensity.
DC Voltage: 600mV-999.9V
Package Weight: 242g / 8.54oz
Operating Temperature: 0~40℃

Silicone Protective Case: protected with a soft silicone cover, you can use the meter at various condition without worrying it from falling down or scratch by hardware.
AC Voltage: 600mV-999.9V
Display: LCD