Manual Carton Closing Stapler 1-3/8-Inch Crown Staples Corrugated Carton Boxes

Description

The carton stapler is made of high-quality iron, aluminum, and steel, so it is strong and durable. It can contain 50 staples for one time and the ergonomic handle allows for easy operation. Meanwhile, the small size and light weight make it convenient for storage and carry. It is your ideal tool.

Specification

Color: Yellow, Black

Material: Iron, Aluminum, Rubber, Steel

Style: Modern

Surface Treatment: Quenching Process

Number of Staples: 100

Capacity: 50pcs

Operation Mode: Manual

Feature: Adjustable

Gross Weight: 2.75kg/6lbs

Package Size: 42.5*14.8*12.5cm/16*5*4inch

Product Size: 30.5*8*26.7cm/12*3.15*10.5inch

Staples Crown: 34.7mm/(1-3/8inch)

Staples Leg Length: 18mm(3/4inch)

Staples Width: 2.3mm/(0.091inch)

Package Included

1* Carton Stapler

1* Staples Pusher

1* Staples Puller

100* Staples

1* Chinese Manual

All Accessories for Assembly

Details

Round Corners: The round corners can prevent scratching your hands.

Ergonomic Handle: The ergonomic long handle allows you to use this product for a long time without hand soreness. Meanwhile, the rubber sleeve with non-slip patterns can play a good non-slip effect to ensure the safety of use.

Staples Puller&Pusher: When you nail the staple in the wrong position, you can use this small puller to pry it open. And the staples pusher with a new structure is easy to operate and has good stapling effect.
 

Application

It is suitable for all kinds of sealed boxes, cartons, closed corrugated cardboard, etc.

How to Install Staples

Pull the staples pusher to the end.
Put the staples into the slot.
Place the staples shaft.
Press and hold the rear fixed shrapnel to push forward.
Fix the shrapnel.
The installation is complete.
 

Notes

1. Please wear safety goggles and earmuffs during operation to ensure safety. Please do not aim the product at your body to avoid injury.

2. Please select the staples specification correctly to avoid jamming and other damages to the tool.

3. When the tool is stopped or repaired, be sure to take out the remaining staples in the clip.

4. The machine can only be used for plane sealing, not for three-dimensional sealing and side sealing. Due to the working principle, there will be small holes on both sides of the sealing points.

5. During operation, the sealing surface of the carton should be stabilized, and the machine should be close to the carton surface, otherwise it is easy to appear invalid operation.

6. This product doesn't include fasteners in the package. Please prepare it in advance if needed.

7. Please read the manual completely before use, and pay particular attention to the safety instructions included.

8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.