15pcs PVC Stair Anti-skid Strip Trim Strips Stair Edge Protector Edge

How to Install:

• Clean the surface and dry it naturally.
• Cut it to the desired length.
• Tear off a section of 3M adhesive tape on both sides of the back, and fix one end.
• Stick the wide side first, tear off the tape, and press it until the wide side is pasted to the floor.
• Stick the narrow side the same way.
• To paste the corner, you need to cut off the plane and wide side and retain the facade. After finishing, you need to cut off the excess part according to the actual condition.
• After sticking, you can step on it, but it can't touch water within 10 hours.

Specifications

• Color: Grey/Black
• Material: PVC
• Mount Type: M3 Tape Stick
• Number of Pieces: 15
• Process: Extruding Process
• Thickness: 3.3mm/0.13inch
• Assembly Required: No
• Product Size: 90*5*2.5cm/35.43*1.97*0.98inch
• Packaging Size: 92*9*7cm/36.22*3.54*2.76inch
• Gross Weight: 4kg/8.82lbs
• Package Included
• 15*Stair Edge Protectors

Notes

• Please check the size carefully before ordering.
• Please note that it is not suitable for rough surfaces, so you must keep the surface smooth and clean before sticking.
• Please note that the applicable temperature of the product shall not be lower than 14 ℉.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.