TABODD Drywall Sander, 710W Electric Handled Drywall Sander with Vacuum, Variable Speed 500-2300r/min 7 Inch Portable Electric Led Light Wall Ceiling Sander with 6 PCS Sanding Disc

This sanding machine is capable of sanding drywall and plaster ceilings. It provides you with added ease and versatility for your sanding projects. The tool has a removable rotatable sanding disc that allows the edge of the sanding paper to come right up to the wall edge. An additional great new feature is the LED halo lighting system which provides an optimal vision of the work surface and adds visibility in a low-light work environment.
Specifications
Voltage: 110V
Frequency: 60Hz
Power: 710W
No-Load Speed: 500-2300r/min
Dia. of Grinding Disc: 180mm/7in
Dia. of Sandpaper: 180mm/7in
Number of Sandpapers: 6
Plug: US Standard
Material: Engineering Plastic
Power Source: Corded Electric
Color: ‎Red and Black
Light: LED Strip
Power Type: Plug-in Power Supply
Type: Portable Polishing Machine
Working Principle: Disc Polisher
Power Cord Length: 3.3m/130in
Dia. of Tube: 32mm
Dust Collection Tube Length: 2m/78.7in
Auxiliary Handle Length: 12cm/4.72in
Gross Weight: 3.5kg/7.71 lbs
Net Weight: 2.4kg/5.29 lbs
Product Size: 23.3*25*30cm/9.17*9.84*11.81in
Package Size: 36*28*28cm/14.1*11*11in
Extra Long Hose: The 78.7in hose length provides a longer range, reducing the need for extension cords and providing greater versatility in the workplace.
Adjustable Handle:The auxiliary non-slip handle can be mounted on either side, which also makes work easier. It is suitable for the left and right hand.
External Carbon Brush: It is convenient for you to replace the carbon brush when it runs out and makes the entire process more convenient and efficient.
Application
It is suitable for renovators or people with high DIY ability to use it to easily sand plaster walls, putty walls, white cement walls, etc.
How to Use
Commissioning Machine:
Link the machine according to the manual, plug in the power supply, and commission the machine
Determine the hardness and softness of the wall putty, decide which type of sandpaper to use, and choose the speed of the machine.
Sanding Operation:
Sanding personnel are required to put the grinding disc to the wall first, and then work on the machine.
When sanding the upper part of the wall, operate the machine with up and down W-shaped movement. When using the W-shape working method, pay attention to maintaining an even speed when moving up and down, and not to pause when turning, which will cause sand marks on the wall.
When sanding the lower part of the wall, operate the machine to move up and down sideways.
Sand the top of the wall choosing the shoulder type. In the process of sanding the top, pay attention to keeping the balance of the grinding disc when moving under the feet.
Sanding should be done in order to avoid missing.
Notes
Beware of electrical safety hazards, please use such tools in accordance with product instructions and take the necessary personal protective measures, and place them out of the reach of children on a daily basis.
When sanding high walls, if an accidental drop causes the dust tube to disconnect from the black connecting clasp, simply insert the black connecting clasp into the telescopic tube first, then tighten the dust tube clockwise to the inside of the connecting clasp until it cannot be tightened.
Please note that this product does not support the additional installation of extension handles or folding handles.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

Package List:

1*Sanding Machine
2*Carbon Brushes
1*Dust Collection Tube
1*Dust Collection Bag
6*Sandpapers
1*Allen Wrench
1*Auxiliary Handle
1*English Manual
Other Accessories for Assembly