6 Gauge Universal Dash Insert, 3-3/8 Inch, Engine Turned

6061-T6 aluminum dash panel supports standard six-gauge instrument kits. Fits most any flat dash application for driver or centered position on dash. Uses 3-3/8-inch speedometer/tachometer and 2-1/16-inch supporting gauges. Gauge mounting panel is retained by gauge brackets, adhesive, or optional billet trim ring. .090-inch thick panel (.063 for engine turned version) is 19-3/8-inches long by 5-inches tall. Pre-drilled for 5/32-inch LED turn signal and high beam headlight indicators. Gauge panels offered in matte black wrinkle, engine turned dash, or fully polished finishes. Gauges sold separately and not included with aluminum dash panel. Provide The Perfect Home for Your Vehicle’s Instrumentation As classic trucks, hot rods, and custom builds pass down from owner to owner, each one tends to add their own touch to the vehicle. Sometimes that “touch” doesn’t age very well or wasn’t installed in the most correct of manners. We see this a lot with vehicle instrumentation. Gauge styles, sizes, and mounting locations can be a very personal thing and what one owner or builder has used may not be exactly what the next owner had in mind. The good thing is that this is rarely a deal breaker, as there are literally hundreds of instrument designs out there to go with what you may have in mind for your dash updates. Often, however, the old gauges were direct mounted into the flat fiberglass or steel dash assembly and now there are some holes that may no longer be sized for the gauges you are planning. A dash insert is a great way to cover up these old holes and securely mount your new gauges. Obviously, a dash insert can be used on a new build as well. So, if you’re planning out your gauge location and mounting considerations on that brand new flat dash you just installed, a dash insert, such as our 6061-T6 aluminum 6-gauge insert is the perfect solution. Supports Mounting Popular Six-Gauge Instrument Packages We all know factory instruments leave a lot on the table. Most are rudimentary at best, or after decades of service may not even work properly anymore. Of course, many vehicles are saddled with the most basic “idiot light” setups too for oil pressure and even temperature! That just won’t fly for monitoring that expensive crate engine you just dropped onto the frame rails. So, when it comes time to put some quality instruments in your dash to monitor your engine’s vitals the most popular setups are the six gauge instrument kits with speedometer, tachometer, oil pressure, water temperature, fuel level, and volts. Our aluminum instrument panel features an easy to scan gauge layout with speedometer and tachometer instruments centered and flanked by two auxiliary gauges on each side. The aluminum dash panel is designed to fit popular 3-3/8-inch speedometers and tachometers, while the auxiliary gauge holes are sized for the smaller 2-1/6-inch sized gauges. Additionally, the gauge mounting panel is pre-drilled for 5/32-inch (.177-inch) LED indicators for high beam (typically blue or red) and turn signal (typically green). If you prefer a larger indicator, you can simply use a step drill bit to slightly enlarge the holes to us larger 1/4-inch LED or 5/16-inch LED indicators as desired. Multiple Mounting Options to Best Fit Your Build Plans At just .090-inch thick (.063-inch for engine turned version), our 6-gauge insert panel can easily be adhered directly to your dash structure using common auto body adhesives to retain the insert to your dash after creating the mating instrument openings in your dash material. Alternatively, you can utilize your gauge’s retaining brackets in most installations to clamp the gauge mounting panel into place. One of the best options for retaining your 6-gauge panel may be our billet 6-gauge bezel