Network Attached Storage TL-R400S-US 1U 4Bay rackmount SATA JBOD expansion unit with QXP-400eS-A1164 PCI Express

TL-R400S Rackmount JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows and Ubuntu computers and servers. The TL-R400S features four 3.5-inch SATA 6Gb/s drive bays, the shallow rack design is perfect for installing the TL-R400S in a compact rack, or in areas with a lot of cabling. TL-R400S comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.


High-capacity TL SATA JBOD not only can expand NAS storage, but also Windows and Ubuntu computers and servers.

SFF-8088 (or SFF-8644) connection cable supports four SATA 6Gb/s channels per cable (24Gb/s in total) and provides faster data transfer speeds than eSATA and USB.

The short depth rackmount NAS is perfectly suited for installation in a compact rack, or places with a lot of cabling.



High-performance of TL SATA JBOD

The TL SATA JBOD supports multi-lane SATA 6Gb/s transfer, and each SATA lane directly connects to a single SATA drive to help improve performance. With the 1-1 high-speed channel, the TL SATA JBOD delivers excellent transfer performance.

Note: The SFF ports and drive slots order: SFF port 1 to HDD slot 1-4, SFF port 2 to HDD slot 5-8, SFF port 3 to HDD slot 9-12, SFF port 4 to SDD slot 1-4 (TL-D1600S)



Flexible Storage Configuration and Management

The TL-R400S provides software-controlled storage configuration for greater management flexibility. You can configure RAID and monitor JBOD enclosure and disk health with Storage & Snapshots when connected to a QTS or QuTS hero NAS, or with the QNAP JBOD Manager utility when connected to a computer.

Drive Bay
4 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Audio Alert On/Off Switch
Yes
Form Factor
1U Rackmount
Host Interface
1 x SFF-8088
LED Indicators
HDD 1-4, Status, Link, Fan error
Buttons
Power switch
Max. number of HDDs/SSDs supported
4
Hard Drive Type
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Operating temperature
0 - 40 ^oC (32^oF - 104^oF)
Storage Temperature
-20 - 70^oC (-4^oF - 158^oF)
Relative Humidity
5-95% RH non-condensing, wet bulb: 27^oC (80.6^oF)
Power Supply Unit
100W PSU, 100 - 240V
Power Consumption: Operating Mode, Typical
25.07 W
Tested fully polulated with Seagate ST6000NM0024 hard drives.
Fan Mode Switch
Yes (Auto, high, medium, low)
Fan
2 x 40mm, 12VDC
Sound Level
22.1 db(A)
System Warning
Buzzer
Kensington Security Slot
Yes
Item Dimension (L inchxW inchxH inch)
22 x 17 x 8

Weight
22.00 lb

Warranty Information
3 years