Lubegard Kooler Kleen Transmission Cooler Flush with 2-in-1 Fitting (13.25 oz)

Used endorsed and approved by multiple OEMs to safely flush contaminants from the transmission cooler lines. Prevents contamination of new or rebuilt units. Removes grease dirt sludge grime and metal shavings. No water or soapy residue to contaminate new ATF fluid. Ideal for those that do not have a flushing machine. Does not contain ozone depleting chemicals or CFCs. Does not contain chlorinated solvents. Formulated to not harm seals or degrade new ATF fluid. Directions: For Line Flush Cleaner: Attach connector to transmission feed line. Next attach hose to transmission return line to collect flush and residue in a waste container. Hold can upright and actuate. Flush until clear. For best results use entire content of can per installation. Then turn can upside down and continue cleaning with air only. For Wire Harness Cleaner: Cut off hose to appropriate length to direct the stream. Spray over dirty depowered 6-12 volt electrical components. For Dielectric Protectant: Allow cleaned co