REFLEX THREADER SKATE UTILI TOOL All in one for Skateboard Longboard ORANGE

Very handy tool to keep in your skate kit tool box or bag or whatever. Just like the old New Deal Fix Styx but better. The bearing pusher and pulling is the best tool there, keeps too much leverage or pressure from being put on the wheel. The T-driver is a nice option but the short length doesn't give it enough torx with Allen slot kingpins. I figured a trick though. Remove the T-Hand Tri-driver, flip it up side down and put back into the slot so the Philip's head is pointing into the shaft of the theader. Snap it down. Then it becomes large and more rigid so just pin the driver with your thumb, lightly and use the rest of the tool for leverage. Now.. they could have molded a slot about a 1/2 inch or less below the groove for the other locking position, but that would have been to much works I guess. After all, they spent HOW much time engineering the device and I see the obvious in less than 2 Hours. AND that's because I haven't been fondling for 2+ hours.. more like 5-10 minutes. Been sitting around mostly. Handy tool to have if you don't want about 10 other larger tools, but get another lower budge too to carry because if you take this out of the workshop, it will vanish. So get something expendable.. like the Shorty's tool. The shorty's tool also has a hardware nut socket, the pictures don't show it and most descriptions don't mention it. If not that one get the Yoacher Tool. The Yoacher tool is a better version of the Known tool. The L drive slides into a compartment Walmart doesn't have it but TGM does. Either of those are handy to have while out skating, they're cheap and they can just everything will need adjusting.