Hero image 0 of Alphasonik Monoblock Amplifier 2400 Watts Class A/B Amp Neuron Series NA2400.1AB, 0 of 4

Alphasonik Monoblock Amplifier 2400 Watts Class A/B Amp Neuron Series NA2400.1AB

(No ratings yet)

Alphasonik Monoblock Amplifier 2400 Watts Class A/B Amp Neuron Series NA2400.1AB Alphasonik NA2400 1AB Neuron Series Monoblock 2400 Watts 4 Ohms Car Amplifier Alphasonik NA1600 1AB Neuron Series Class A B Monoblock 1600 Watts 4 Ohms Car Amplifier

Actual Color:2400 Watt

1600 Watt, $129.95

selected, 2400 Watt, $179.95

Key item features

High-Level Inputs
High-Level Inputs are an added bonus of having the capability of using the source units speaker outputs. Having High Level Inputs is needed if your source unit doesn’t have Low-Level Outputs. Tap into the rear decks speakers and you’re all set! Eliminating the need for a Hi to Low Converter.
Nickel Plated Terminal Block
Nickel-plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.
Extruded Heat Sink
Keeping the amplifier cool increases the efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.
Remote Bass Knob
The external bass controller that will allow you to adjust the bass level remotely without having to retune the amplifier. This is a perfect solution to increase and decrease the bass when you have a wide variety of music genres. Giving you the ability to adjust the bass song by song.
Specifications:
- RMS 4 Ohms: 1200 Watts x 1
- RMS 2 Ohm: 2400 Watts x 1
- Terminal: Nickel Plated
- Input Signal: Low Level & High Level Inputs
- Output Signal: No
- Remote Bass Knob: Yes
- Amplifier Protection: Thermal, Short Circuit, Overload and DC Offset
- Low Pass Crossover: 50 Hz - 250Hz
- Variable Input Sensitivity: 200mV - 6V
- Frequency Response: 10Hz - 250Hz
- Bass Boost: 0 - 12dB
- S/N Ratio: >90dB (+/-3dB)
- Fuse Rating: ATC 40A x 2

Specs

Brand
Alphasonik
Rms power rating
1200 W
Channels
1
Impedance
4 ohm
Peak audio power handling
2400 W
Input/output type
RCA

Current price is $179.95

Price when purchased online

Free shipping
Free 30-day returns

Walmart Protection Plan by Allstate

(Only one option can be selected at a time)

3-Year Plan - $24.00

4-Year Plan - $34.00

How do you want your item?

Columbus, 43215

Arrives between Apr 2 - Apr 4

Sold and shipped by Techronics

4.409722222222222 stars out of 5, based on 144 seller reviews(4.4)

Report an issue with this seller

Free 30-day returns

About this item

Product details

Alphasonik Monoblock Amplifier 2 Ohm A/B Class NA2400.1AB The NEURON Series of Amplifiers from Alphasonik will leave you astonished when you experience the power deliverance of these amplifiers and leave you in a conundrum on how it's even possible to achieve the power vs the almighty dollar. Not only did we accomplish the power that is needed and desired, but we didn't leave out any of the bells & whistles either. Things like 4-way protection circuitry and RCA throughputs to add more amplifiers. Features • Nickel-plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. • Extruded Heat Sink • Keeping the amplifier cool increases the efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. • The external bass controller will allow you to adjust the bass level remotely without having to retune the amplifier. • RMS 4 Ohms: 1200 Watts x 1 • RMS 2 Ohm: 2400 Watts x 1 • Terminal: Nickel Plated • Input Signal: Low Level & High Level Inputs • Output Signal: No • Remote Bass Knob: Yes • Amplifier Protection: Thermal, Short Circuit, Overload and DC Offset • Low Pass Crossover: 50 Hz - 250Hz • Variable Input Sensitivity: 200mV - 6V • Frequency Response: 10Hz - 250Hz • Bass Boost: 0 - 12dB • S/N Ratio: >90dB (+/-3dB) • Fuse Rating: ATC 40A x 2

High-Level Inputs
High-Level Inputs are an added bonus of having the capability of using the source units speaker outputs. Having High Level Inputs is needed if your source unit doesn’t have Low-Level Outputs. Tap into the rear decks speakers and you’re all set! Eliminating the need for a Hi to Low Converter.
Nickel Plated Terminal Block
Nickel-plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.
Extruded Heat Sink
Keeping the amplifier cool increases the efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.
Remote Bass Knob
The external bass controller that will allow you to adjust the bass level remotely without having to retune the amplifier. This is a perfect solution to increase and decrease the bass when you have a wide variety of music genres. Giving you the ability to adjust the bass song by song.
Specifications:
- RMS 4 Ohms: 1200 Watts x 1
- RMS 2 Ohm: 2400 Watts x 1
- Terminal: Nickel Plated
- Input Signal: Low Level & High Level Inputs
- Output Signal: No
- Remote Bass Knob: Yes
- Amplifier Protection: Thermal, Short Circuit, Overload and DC Offset
- Low Pass Crossover: 50 Hz - 250Hz
- Variable Input Sensitivity: 200mV - 6V
- Frequency Response: 10Hz - 250Hz
- Bass Boost: 0 - 12dB
- S/N Ratio: >90dB (+/-3dB)
- Fuse Rating: ATC 40A x 2

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Brand

Alphasonik

Rms power rating

1200 W

Channels

Impedance

4 ohm

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

Warnings

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm.