This system has a 10 day handling time. Please allow up to 2 weeks before your item ships.
Fits Husqvarna
1984-94 4-Stroke TE 350 410 510cc
with inverted SEM ignition 1984-87 (requires M14x1LH rotor nut), or non-inverted SEM ignition 1983 and after 1987
20mm SEM (110mm)
Air Cooled
Large Shaft
51oz / 1.45kg Flywheel
Replaces old KEM type K10 including ignition coil
12 Volt / 70 Watt AC
This system does not include a puller or spark plug cap
This is the A/C system and will run headlights and taillights.
This is a complete system including Rotor, Stator, Coil-CDI, Regulator (where applicable), Adaptor mounting plate (where applicable), Spark plug cap, and hardware.
The Powerdynamo ignition system is a magneto based generator with integrated, fully electronic ignition. It is equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. Powerdynamo external flywheel type ignitions are an analog type, CDI ignition with 80-100 watts of 12-volt lighting capacity capable of delivering up to 40,000 volts! Systems are available for Bultaco, Hercules, Husqvarna, KTM, Maico, Ossa, Sachs, Zundapp, & small, medium & large shaft Husqvarna engines.
The Powerdynamo external flywheel type ignition system is a magneto based generator with integrated, fully electronic ignition, equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. The Powerdynamo ignitions bolt on with no engine case modifications. The system provides a higher output with a very solid spark, for easy starting & lighting that does not take away from the ignition coil.
Powerdynamo Ignitions are an analog type, CDI ignition with 80-100 watts of 12 volt lighting capacity, capable of delivering up to 40,000 volts! Remember to change those 6 Volt bulbs with 12 volt bulbs!
Motoplat Ignitions were imported & distributed by Penton from 1969 to 1993, the Spanish company's final year of production. We provide complete dynamic, diagnostic testing of the systems.
