SUNLU AMS Heater, Filament Dryer Box for Bambu Lab AMS, Enables Drying while Printing,Easy to Use (AMS Not Included)

This SUNLU AMS Heater is compatible with the Bambu Lab AMS - Automatic Material System. It is a filament dryer box for the Bambu Lab AMS. Note: Please note that this product is optimized and upgraded exclusively for Bambu Lab's AMS (1st gen), and is not compatible with Automatic Material Systems from other Brands. Drying and printing are performed simultaneously. This is a heater that can upgrade the upper cover of the AMS. Compared to the traditional printing process using the AMS, which requires drying before printing, the upgraded version allows for simultaneous printing and drying. SUNLU AMS heater has high-efficiency heating with uniform temperature distribution, reaching 70°C within 20 minutes. The dual airflow design ensures even heat circulation, preventing localized overheating of materials and effectively reducing the risk of thermal deformation. After upgrading to the SUNLU AMS heater, it supports stacked 16-color printing and saves space. Upgrades the heater for the AMS Generation 1 upper cover, seamlessly integrating with the Generation 1 seal strip and fully compatible with the Generation 1 seal preservation function. SUNLU AMS heater has simple install process: Loosen—disassemble—tighten, completed in just 2 minutes. SUNLU AMS heater has PTC heating, Dual-level protection with a temperature control switch, Software-based intelligent temperature control, real-time temperature monitoring, and automatic control of the heating system. Maximum drying temperature of 70°C. Alarms are triggered when the temperature exceeds the set value by 10°C, when the temperature fails to rise, or when the fan malfunctions. The device operates according to the set time and automatically shuts down when the time reaches zero.