.8mm MINI GRAVITY FEED SPRAY GUN WITH .5mm & 1.0mm TIPS & Side Mounted CUP

The Spray Gun Pistol Trigger Design and the included range of Nozzle Sets allows this Miniature Spray Gun to perform as a Touch-Up & Detail Spray Gun with the 0.8 & 1.0mm Nozzle Sets or as a Large Airbrush with the 0.5mm Nozzle Set. This Multi-Purpose Miniature Spray Gun is well suited for uses demanding precise control of spray when applying moderate-to-large amounts of material to a variety of surfaces and to different sized areas. The 7 ounce gravity cup is side-mounted and rotates, allowing you to spray horizontally, vertically or underneath surfaces making it excellent for small or hard to reach areas. This Gun provides a minimum amount of overspray, making it excellent for situations where an Automotive Touch-Up Spray Gun would normally be used. It's commonly used by Auto Painters, Hobbyist and Artists for Paint Chip Repairs, Signs, Backgrounds, Murals, Etc. - Air Inlet: 1/4" - Air Pressure: 30-60 PSI (2.0-4.0bar) - Air Consumption: 2.5-6.0 CFM - Cup: 7 Ounces (200 ml) Aluminum Gravity Feed Side Mount - Nozzle Atomizing Sets in sizes: 0.5mm, 0.8mm & 1.0mm Reduces waterborne paint drying time, as it amplifies air volume from your compressor. Reduced Drying time reduces the risk of paint defects. Air Dryer Gun prvides the Coanda effect which amplifies inlet air flow. Variable air flow design allows you to adjust drying speed. Max. Pressure: 120 psi (8 Bar) Working Pressure: 56 to 100 psi (4-7 Bar) Air Inlet: 1/4" NPS