Metal Tap Plug Right Hand Set Taper Tapping Workshop Ball bearing steel

Metal Tap Plug Right Hand Set Taper Tapping Workshop Ball bearing steel

Details:

* brand new high quality

*Rugged and durable, it is a good helper for your work and life

*Easy to use.

*Durable and practical.

*Brand new right-hand thread tap.

*Good use condition.

*The tap range of metric thread is 0.25mm to 0.8mm

*Tap is the most important tool for manufacturers to perform thread processing

Instructions:

*When tapping, insert the head cone first to make the center line of the tap consistent with the center line of the drilling.

* Rotate the two hands evenly and apply a little pressure to make the tap enter the cutter. There is no need to add pressure after the cutter.

*The tap is reversed by about 45° each time to cut the chips to avoid blockage.

*If the tap is difficult to rotate, do not increase the rotating force, otherwise the tap will break.

Specifications:

*Color: as shown

*Material: Ball bearing steel

*Size: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25cm

*Packing: M3, M4, M5, M6, M8 6.2*2.5*0.5cm

*Quantity: 5

Package list:

5*Metric tap

Tips:

Conversion: 1inch = 2.54cm, 1cm = 0.393inches

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.