Seismic Audio Pair Dual 10" PA DJ Speakers 600 Watts ~Pro Audio Band - SA-100T

Before Purchasing these I spoke with Rusty on his advise about running these off my 2 Powered Tremor18 satellite output. His Reply" Tremor18 Satellite/Binding post outputs are stable down to 4? each channel, left and right. These outputs can not be bridged. They operate at 220W RMS @ 4?." I run left and right XLR in to bridge the sub. Then daisy Chain to The other Tremor. I used a 22" pole to mount the SA100T above both. I am Using Speakon to run them in stereo. Using the Balance to channel left thru #1 and Right thru #2. I am running them thru a Sound Blaster pro studio sound card output thru my laptop. I am very impressed with the sound quality of the SA100T and the power of the Tremor18 satellite amp. The Pro Studio Sound card has preamp EQ. This required a little adjustment to balance the Sub and SA100T. I am not running the High pass filter. The Bass from the SA100 and Tremor 18 enhance each other in full range. On high bass audio I can feel from 10-12 feet. Running around 100db on the peak. I estimate this is running at around 80 percent of what the system can handle with this setup. It is very loud an clear in all ranges. After 2 hours of steady usage at this level. Sub heat sinks were warm but not hot. I feel it would sustain this level indoors with no issues for any amount of time. Outdoors I will run 7" fans directed at heat sink to help keep them cool. I rated the Tremors at 4 out of 5 for premature clipping. I rate the SA100T 5 out of 5. Running the SA100T with the Tremor I rate 5 out of 5. The 2 units work very well together. Great product and Great Price. You simply cannot go wrong with SA.