Hero image 0 of TRADESAFE Emergency Stop Button Cover, Box Type Push Button Cover with 5-1/4" x 2-7/8" Mounting Hole, 0 of 9

TRADESAFE Emergency Stop Button Cover, Box Type Push Button Cover with 5-1/4" x 2-7/8" Mounting Hole

(No ratings yet)

TRADESAFE Emergency Stop Button Cover, Box Type Push Button Cover with 5-1/4" x 2-7/8" Mounting Hole TRADESAFE Emergency Stop Button Cover Box Type Push Button Cover with 5 1 4 x 2 7 8 Mounting Hole TRADESAFE Emergency Stop Button Cover Round Push Button Cover with 7 8 Hole Diameter 5 Pack TRADESAFE Emergency Stop Button Cover 3 Piece Round Push Button Cover with 7 8 to 1 1 2 Hole Diameter TRADESAFE Emergency Stop Button Cover Box Type Push Button Cover with 2 7 8 x 2 7 8 Mounting Hole TRADESAFE Emergency Stop Button Cover Box Type Push Button Cover with 7 8 Hole Diameter TRADESAFE Emergency Stop Button Cover Round Push Button Cover with 1 1 8 Hole Diameter 5 Pack

Size:Box Type | XL | 1-Pack

Key item features

TRADESAFE E Stop Switch Lock Cover includes:

1x Box Type Push Button Switch Cover
Double-faced adhesive
4x screws

(1) Emergency Button Cover

Features 5-1/4" x 2-7/8" mounting hole to lock out various control buttons and switches; built tough from industrial-grade transparent polycarbonate body and red ABS plastic base with 6" x 3-5/8" x 2-1/4" inner body dimensions and 2 cord holes to fit up to 3/8" cord diameter
Secure with up to 2 lockout tagout locks or lockout hasps with 5/16" shackle diameter

Part Number: TSE64

FAQs

1. Can this button cover be installed outdoors, potentially exposing it to hot and cold weather conditions?

Yes. TRADESAFE push button lockout is made of industrial-grade polycarbonate body, which is an enduring and resilient thermoplastic material that can withstand severe weather conditions.

2. How to install this emergency switch cover?

Conveniently install this emergency stop enclosure by positioning the hole over the button, affixing it using a double-faced adhesive tape or screws, and then securing it with a lockout lock.

3. Is it possible to remove this e stop button cover after installation for reuse on another switch or controller?

While a high quality double-faced adhesive or screws ensure secure attachment of the switch lockout, it is still possible to remove the lockout device for use on a different button, provided that proper measures are followed.

4. Once installed, will this push button switch guard moist inside?

Yes, tiny spaces allow moisture to enter this estop cover, but it usually dissipates over time.

5. Will this fit to lock out a wall outlet or wall switch?

This emergency stop cover is designed for control buttons and switches, however, it may fit a wall outlet or switch, depending on the size. The hole of this lockout device is 5-1/4" x 2-7/8", inner height is 2-1/4", and inner length is 6".

Should you encounter any issues, we strongly encourage you to reach out to us immediately. Our team is committed to providing exceptional service and finding the quickest solution for your concerns.

At TRADESAFE, your peace of mind is our top priority. We are an established USA-based and owned industry expert and safety partner. Trusted by professionals. Depended on by 1000’s daily.

IMPORTANT NOTE: TRADESAFE exclusively offers this Emergency Switch Cover Box, and we stand firmly behind its authenticity. Beware of counterfeits and unauthorized sellers. Guarantees and warranties do not apply to purchases made from unauthorized resellers.

Specs

Brand
TRADESAFE
Material
Polycarbonate, ABS Plastic
Color
Clear, Red
Height
2.5 in
Count
1
Weight
0.43 lb

Current price is $44.95

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Columbus, 43215

Arrives between Apr 10 - Apr 14

Sold and shipped by TRADEBASE

4.5 stars out of 5, based on 8 seller reviews(4.5)

Report an issue with this seller

Free 30-day returns

About this item

Product details

TRADESAFE Emergency Stop Button Cover, Box Type Push Button Cover with 5-1/4" x 2-7/8" Mounting Hole efficiently safeguards emergency stop buttons, control buttons, and spiral release switches among others from unauthorized access. Exclusively engineered for safety, this power button cover can endure even the most adverse industrial environments. Our push button covers are developed and tested to comply with OSHA Standard for Lockout Tagout (29 CFR 1910.147). Also available in 7/8” and 2-7/8" mounting holes and round-type options.

TRADESAFE E Stop Switch Lock Cover includes:

1x Box Type Push Button Switch Cover
Double-faced adhesive
4x screws

(1) Emergency Button Cover

Features 5-1/4" x 2-7/8" mounting hole to lock out various control buttons and switches; built tough from industrial-grade transparent polycarbonate body and red ABS plastic base with 6" x 3-5/8" x 2-1/4" inner body dimensions and 2 cord holes to fit up to 3/8" cord diameter
Secure with up to 2 lockout tagout locks or lockout hasps with 5/16" shackle diameter

Part Number: TSE64

FAQs

1. Can this button cover be installed outdoors, potentially exposing it to hot and cold weather conditions?

Yes. TRADESAFE push button lockout is made of industrial-grade polycarbonate body, which is an enduring and resilient thermoplastic material that can withstand severe weather conditions.

2. How to install this emergency switch cover?

Conveniently install this emergency stop enclosure by positioning the hole over the button, affixing it using a double-faced adhesive tape or screws, and then securing it with a lockout lock.

3. Is it possible to remove this e stop button cover after installation for reuse on another switch or controller?

While a high quality double-faced adhesive or screws ensure secure attachment of the switch lockout, it is still possible to remove the lockout device for use on a different button, provided that proper measures are followed.

4. Once installed, will this push button switch guard moist inside?

Yes, tiny spaces allow moisture to enter this estop cover, but it usually dissipates over time.

5. Will this fit to lock out a wall outlet or wall switch?

This emergency stop cover is designed for control buttons and switches, however, it may fit a wall outlet or switch, depending on the size. The hole of this lockout device is 5-1/4" x 2-7/8", inner height is 2-1/4", and inner length is 6".

Should you encounter any issues, we strongly encourage you to reach out to us immediately. Our team is committed to providing exceptional service and finding the quickest solution for your concerns.

At TRADESAFE, your peace of mind is our top priority. We are an established USA-based and owned industry expert and safety partner. Trusted by professionals. Depended on by 1000’s daily.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Brand

TRADESAFE

Material

Polycarbonate, ABS Plastic

Color

Clear, Red

Height

2.5 in

Warranty

Warranty information

All of our products are warrantied for a period of FIVE (5) years. This limited warranty is broken into two halves: The first TWO (2) years is a full replacement warranty. The second THREE (3) years is a prorated warranty. The entire FIVE (5) year warranty period is measured from the original date of purchase of the original product and applies only to the original purchaser. (If the original purchaser gifts or sells the product, the new owner takes the product “as is” and “with all faults.”) Warranty claims are to be made at the point of purchase directly through the original retailer, dealer, distributor, or seller.

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.