SG ADFORS Fiberglass Screen Repair Kit, Extra Strength, 36 in. x 25 ft. Charcoal

Earlier this year I started a project to replace screens on my garage windows (5) that are old, with tears/holes in them, allowing bugs and other critters (birds, rats) to enter the garage uninvited. After shopping for the proper screening and splines, I bought a kit that was ok for replacing 2 of the screens (29”X35”). My intent was to replace the other 3 when I ran across a sale on screen/splines. So when I saw the Saint-Gobain ADFORS 36 in x 25 ft. Fiberglass Extra Strength Screen Kit for Windows and Door, Charcoal, I ordered it immediately. The Saint-Gobain’s screen kit comes with 25’ of 36” wide extra strength fiberglass screen in a well packaged roll. Also in the kit is many feet of supple spline and a good spline tool. I used the kit to easily replace one of the 3 remaining garage window screens, saving the last 2 until after a July 4th celebration. In addition to the included items, you will need a blade screwdriver (blunt) to seat in the corners of the spline, scissors to cut the initial screen size (an inch over size in both dimensions), and a sharp box cutter or Xacto type knife to trim the excess screen once the spline is installed. I also use a couple of small pinch-style clamps to hold the screen in place while installing the spline. Overall, this is a great kit that contains enough extra strength fiberglass screen material to re-screen many windows and/or a few doors. As a plus, the charcoal screen material looks very clean installed. I definitely recommend it to anyone needing to re-screen more than one or two windows.