Hillman 838619 Solid Shaft Collar 7/16 in. ID x 7/8 in. OD x 7/16 in. Thick

Use the Hillman Solid Shaft Collar. Shaft collars are commonly used as mechanical stops, locating components, and/or bearing faces within mechanical systems. They are easy to adjust with set screws. Shaft collars create a tight fit and greater holding power without the damage normally caused by set screws alone. To install, simply slide these collars onto a shaft and tighten the set screw to hold the collar in place. Hillman hardware is made for reliable performance. 7/16 in. shaft collar is part of the Hillman Deep Drawer program.

• Commonly found in power transmission applications, such as motors and gearboxes
• Effective on both hard and soft-material shafts
• Easily installed where major assembly/disassembly would otherwise be required
• Zinc-plated Hillman hardware for improved corrosion resistance
• 7/16 in. shaft collar is part of the Hillman Deep Drawer program
• Measures 7/16 in. ID x 7/8 in. OD x 7/16 in. thick