Car Nitro OBD OBD2 Fuel Saver Tuning Chip Box for diesel Vehicles Plug & Drive

Plug and Drive NitroOBD2 Performance Chip Tuning Box for Benzine Cars

NOTE:
nitroobd2 diesel: red
nitroobd2 gasoline: yellow and Green
Each device available for LPG.

Specifications:
Type: Eco OBD2 Fuel Saver
Material: Plastics
Package Weight: 40g
Color:
- Yellow & Green Just fit for Benzine Cars;
- Red fit for Diesel Cars.

Package content:
1pc x NitroOBD2 Chip Tuning Box Interface

>>>>Feature:
>1.NitroOBD2 finds out the hidden power of your car.
- Up to 35% more power
- Up to 25 % more torque

>2.OBD2 necessarily for cars:
- Sold after January 1, 1996 in the USA
- Sold after January 1, 2001 in the European Union
- With diesel engine sold after January 1, 2003

>3.The OBD2 main function:
- Red and yellow: power increased by 35%, torque increased by 25% (theoretical value, varies according to vehicle conditions and driver habits)
- Green: 15% economical fuel savings (theoretical value, varies according to vehicle conditions and driver habits)

>4.NitroOBD2 is very easy to use,Installation and Calibration:
- 1* Pull the Car Key out from the ignition.
- 2* Find OBD2 connector(*) in your car and Plug in NitroOBD2 Chip Tuning Box.
- 3* Insert the key into the ignition and twist the key to the first stage. (Do not start the car).
- 4* Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (NitroOBD2 Chip Tuning Box will communicate and establish connection with ECU).
- 5* Start up the engine.
- 6* NitroOBD2 Chip Tuning Box will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus NitroOBD2 Chip Tuning Box will adjust itself to match your car perfectly for more fuel saving.

>5.NitroOBD2 Chip Tuning Box is easily removable:
- And after unplug you go back to the factory settings.

Q1*:What is NitroOBD2 Chip Tuning Box?

- NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.
- NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
- NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
- NitroOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug NitroOBD2 from OBD2 connector.

Q2*:Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks.

Q3*:Where located OBD2 connector in your car?
1 Driver's side, underneath dasboard, in the area under the steering column.
2 Driver's side, underneath dasboard,between the driver-side door and steering column area.
3 Driver's side, underneath dasboard, between the steering column area and the center console.
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console.
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column.
6 Center console, vertical surface left of vehicle centerline.
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console.
8 Center console, horizontal surface in front passenger area.