20A, Resin Power Inlet Box, Use When You Need To Plug In A Generator Outdoors To Connect To A Transfer Switch Indoors, Installer Will Mount This Power Inlet Box On The Exterior Of The House, & Will Use A Power Inlet Box When You Need To Plug In Your Generator Outdoors To Connect To A Transfer Switch Indoors, Your Installer Will Mount This Non- Metallic Power Inlet Box On The Exterior Of The House & Will Run Wire Through The Wall Over To The Transfer Switch, Rated At 20A For Generators Up To 5000W, This NEMA 3R, Rated Non-Metallic Enclosure Is Made From Durable, Glass, Filled Nylon & Includes A 20A, 125/250V Male Inlet In NEMA Configuration L14, 20 On Bottom, So It Retains A Rain Tight Rating When Cord Is Connected, Required By Most Inspectors, Works With Any Transfer Switch Rated At 20A, Does Not Include A Flip Lid, UL Listed.
Use when you need to plug in a generator outdoors to connect to a transfer switch indoors. Installer will mount this power inlet box on the exterior of the house, & will use a power inlet box when you need to plug in your generator outdoors to connect to a transfer switch indoors.Your installer will mount this non- metallic power inlet box on the exterior of the house & will run wire through the wall over to the transfer switch. Rated at 20A for generators up to 5000W This NEMA 3R, rated non-metallic enclosure is made from durable, glass, filled nylon & includes a 20A, 125/250V male inlet in NEMA configuration l14, 20 on bottom, so it retains a rain tight rating when cord is connected. Required by most inspectors. Works with any transfer switch rated at 20A.20ARated at 20A for generators up to 5000WUse when you need to plug in a generator outdoors to connect to a transfer switch indoorsInstaller will mount this power inlet box on the exterior of the houseUse a power inlet box when you need to plug in your generator outdoors to connect to a transfer switch indoorsYour installer will mount this non- metallic power inlet box on the exterior of the house & will run wire through the wall over to the transfer switchThis NEMA 3R, rated non-metallic enclosure is made from durable, glass, filled nylon & includes a 20A, 125/250V male inlet in NEMA configuration l14, 20 on bottom, so it retains a rain tight rating when cord is connectedRequired by most inspectorsWorks with any transfer switch rated at 20ADoes not include a flip lidUL listed.