4 Inch Diameter Clear PVC Schedule 40 Pipe [Pipe ID 4.0 inch, OD 4.5 inch] (Bluish tint), Choose Your Length (5 Inches to 8 feet) (Selected Length: 1 Foot)

4 Inch diameter Clear 40 PVC pipe (Schedule 40), Cut to Length.PVC pipe is measured by the nominal inside-diameter (ID), not the outside-diameter (OD).Pipe has an approximate ID of 4.0 inch and an approximate OD of 4.5 inch, per PVC Schedule 40 Specifications. As with all extruded pipe, the inside diameter can vary a little. Tolerance for the inside diameter is +- 2% of the stated diameter.This pipe is manufactured in compliance to ASTM D1785.Pipe has a bluish tint to prevent yellowing from UV light (as seen in pictures).For use with standard PVC fittings and PVC cement.If using with an end , be sure to use a Schedule 40 or Schedule 80 and not a sewer and drain (DWV). A DWV will not fit as it is made to be used with thin-walled drainage pipe.This pipe should be protected from the sun. Extended exposure to ultraviolet light may cause discoloration and the heat may cause warping.Length Tolerance: +- 116 InchPlease note that is no product packaging with this product, it is just the pipe itself.Pipe weight: 30.25 oz. per foot.Do not use PVC pipe with compressed air or gases as it can cause the pipe to explode and create shrapnel.How to cut: If you need to cut the pipe, use a saw such as a hacksaw, miter saw or radial arm saw.